Regular oil changes are essential to keep your vehicle running smoothly and to increase its longevity. One of the most important car maintenance tasks you can do for your 2007-2016 GMC Acadia is to change its oil regularly. Changing your car’s oil is a relatively easy process that you can do at home with the right tools and knowledge.

Here’s a walk-through to help you change the oil in your GMC Acadia:

(Note – This is specifically written for a 2012 model with the 3.6 V6 engine. The process should be the same to do an oil change on most GMC Acadia from 2007 through 2016. However, if you have any doubt, please consult your local mechanic for advice.)

Step 1: Gather the necessary tools and supplies

Before you begin, make sure you have all the necessary tools and supplies. You will need a socket wrench set, an oil filter wrench, a drain pan, a funnel, and a new oil filter and oil. Check your owner’s manual for the recommended oil type and filter for your vehicle.

Step 2: Prepare your vehicle

To start the oil change process, turn on your car and let it run for a few minutes to warm up the oil. Then, turn off the engine and engage the parking brake. Open the hood and locate the oil filler cap. Remove the cap and set it aside.

Step 3: Locate the oil drain plug

Next, locate the oil drain plug. It is usually located on the bottom of the engine. Place the drain pan underneath the drain plug and use the socket wrench to loosen the plug. Be careful as the oil may be hot.

Step 4: Drain the old oil

Let the old oil drain completely into the drain pan. Once it has stopped dripping, wipe off the drain plug and replace it. Tighten the plug with the socket wrench but do not over-tighten it.

Step 5: Replace the oil filter

Use the oil filter wrench to loosen the oil filter. Once you have loosened it, remove it by hand. Take your new oil filter and apply a thin layer of oil around the gasket. This will help it to seal properly. Screw the new oil filter onto the engine by hand.

Step 6: Add the new oil

Once the new oil filter is in place, you can begin adding the new oil. Check your owner’s manual to find out how much oil your vehicle needs. Use the funnel to pour the new oil into the oil filler hole. Once you have added the oil, replace the oil filler cap and close the hood.

Step 7: Check the oil level

Start your car and let it run for a few minutes. Turn off the engine and wait a few minutes for the oil to settle. Then, use the dipstick to check the oil level. Add more oil if necessary.

In conclusion, changing the oil in your 2012 GMC Acadia is a simple and necessary maintenance task that you can easily do yourself. By following these steps, you can ensure that your car is running smoothly and reliably. Just be sure to dispose of the old oil properly and never dump it down a drain or on the ground.

Parts List

Parts and Tools You Will Need:

• New oil filter (personally we recommend K&N oil filters)
• 6 quarts of new oil (check owner’s manual for recommended type and weight)
• Oil filter wrench
• Oil drain pan
• Funnel
• Rag or towel
• Oil filter drain tool (optional)

Step-by-Step Guide:

1. Warm up the engine: Run the engine for a few minutes to warm up the oil. This will make it flow easier when you drain it.
2. Locate the oil filter and oil pan: The oil filter is located under the engine and the oil pan is located underneath the oil filter.
3. Drain the oil: Place the oil drain pan under the oil pan and loosen the oil pan plug using a wrench. Once the oil starts to drain, wait until it slows down to a drip, then replace the plug.
4. Remove the oil filter: Using an oil filter wrench, turn the filter counterclockwise until it comes loose. Be sure to have a rag or towel handy to catch any excess oil.
5. Prepare the new oil filter: Before installing the new oil filter, fill it with fresh oil to help lubricate the engine during startup. Make sure to lubricate the rubber gasket on the filter with some oil as well.
6. Install the new oil filter: Screw the new oil filter on by hand until it is snug, then give it an additional quarter-turn to tighten it.
7. Refill with new oil: Using a funnel, slowly pour 6 quarts of new oil into the oil filler hole. Check the oil level with the dipstick to ensure it’s at the proper level.
8. Start the engine: After the oil has been refilled, start the engine and let it run for a few minutes to circulate the new oil.
9. Check for leaks: Turn off the engine and check for any oil leaks around the oil filter and oil pan plug. Tighten them if necessary.

And that’s it! Changing the oil in a 2012 GMC Acadia is a relatively simple task that can help keep your vehicle running smoothly for years to come. Be sure to check your owner’s manual for the recommended oil change interval and type of oil.

Want More Like This GMC Acadia Oil Change Walkthrough?

If you’re a car enthusiast or just love everything about cars, then our Car Nut Chronicles Newsletter is perfect for you. Our weekly newsletter delivers the latest news, insights, reviews, and features from the world of cars straight to your inbox. Whether you’re interested in classic cars, sports cars, or electric cars, our newsletter has something for everyone. You’ll also receive exclusive content and special offers that you won’t find anywhere else. By signing up for our newsletter, you’ll join a community of car enthusiasts and stay up-to-date on the latest trends, events, and developments in the world of cars. Don’t miss out on this exciting opportunity to indulge your love of cars and join our Car Nut Chronicles Newsletter today!

The post GMC Acadia oil change: A How-to guide for 2007-2016 first appeared on The Car Nut Chronicles.

One of the most important maintenance tasks is doing an oil change in your Toyota Corolla. This guide will walk you through the steps you will need to take in order to get that done. The Toyota Corolla is a reliable and popular car that requires regular maintenance to keep it running smoothly.

As the saying goes, “oil changes are the gateway drug to car maintenance.” And while older folks seem to have a sixth sense for when their ride needs fresh oil, younger generations are left scratching their heads. It’s like we’ve forgotten the ancient art of changing oil, passed down from generation to generation like some kind of automotive secret society. But fear not, my youthful friends, for today we shall embark on a journey of oil-changing enlightenment.

Buckle up and get ready to learn how to give your Toyota Corolla the TLC it deserves with this ultimate step-by-step guide to an oil change!

Materials Needed:

• New oil filter (I personally like the K&N)
• 4-5 quarts of motor oil (Most Corollas hold 4.4q but check your owners manual to be safe.)
• Oil filter wrench
• Oil drain pan
• Funnel
• Rag or paper towels

Step 1: Warm up the engine

Before starting, let the car run for a few minutes to warm up the engine. This helps the oil flow more easily when you drain it.

Step 2: Locate the oil drain plug

To locate the oil drain plug on a Toyota Corolla, you’ll need to slide under the front of the car and look for the oil pan, which is a large, flat metal container located near the bottom of the engine. The drain plug is usually located at the lowest point of the oil pan and has a hexagonal or square shape. It’s important to use the correct size socket or wrench to avoid damaging the plug. Once you’ve located the drain plug, place a drain pan beneath it to catch the old oil.

Step 3: Drain the oil

Now that the oil drain pan is underneath the oil drain plug, use a wrench to loosen and remove the plug. Allow the oil to drain completely into the pan.

Step 4: Remove the old oil filter

Using an oil filter wrench, turn the old oil filter counterclockwise to remove it. It’s recommended to place a rag or paper towels underneath the filter to prevent oil from dripping onto the ground or onto the engine. Be careful not to damage the filter housing or any other components while removing the filter.

Step 5: Install the new oil filter

Take the new oil filter and apply a small amount of oil to the gasket. This helps ensure a proper seal. Screw the new filter onto the engine by hand, then use the oil filter wrench to tighten it an additional half turn.

Step 6: Add new oil

Once you’ve obtained the correct oil, gather a funnel to aid in the pouring process. You’ll need to pour roughly 4-5 quarts of new oil into the engine through the oil filler cap. This process is relatively straightforward, but it’s important to take your time and ensure that you don’t overfill the engine with oil, which can cause serious damage. Be sure to check the owner’s manual for the recommended type and viscosity of oil for your specific Corolla model.

Step 7: Check the oil level

After adding the new oil, use the dipstick to check the oil level. The oil level should be between the “full” and “add” marks on the dipstick.

Step 8: Clean up

Wipe off any excess oil with a rag or paper towels, and then dispose of the used oil and filter properly.

Time To Drive

By following these steps, you can easily change the oil in your Toyota Corolla, and you can keep it running smoothly for years to come. It’s recommended to change the oil every 5,000 miles or every six months, whichever comes first, for optimal engine health.

In addition to regular oil changes, we recommend the following routine maintenance to keep your car to be in tip-top shape:

1. Tire rotation and alignment: Regular tire rotation and alignment can extend the life of your tires and improve your car’s handling and fuel efficiency.
2. Brake system inspection: The brake system should be inspected periodically to ensure that the brake pads, rotors, and calipers are in good condition and functioning properly.
3. Air filter replacement: A dirty air filter can reduce your car’s performance and fuel efficiency. Replace the air filter regularly to ensure that your engine is getting the air it needs to operate efficiently.
4. Fluid checks and replacements: Your car’s fluids, including coolant, brake fluid, power steering fluid, and transmission fluid, should be checked regularly and replaced as needed to keep your car running smoothly.
5. Spark plug replacement: Worn or dirty spark plugs can cause poor engine performance and reduced fuel efficiency. Replace spark plugs as recommended by the manufacturer to keep your engine running at its best.
6. Battery maintenance: Check your car’s battery regularly to ensure that it’s charging properly and holding a charge. Clean the battery terminals and cables as needed to prevent corrosion.

By performing these routine maintenance tasks, you can help ensure that your Toyota Corolla stays in good condition and runs smoothly for years to come.

Don’t miss out on exclusive content and special offers! Sign up for our newsletter today and stay up-to-date on all the latest news and information in your favorite topics.

Note To Reader: Car Nut Chronicles is reader supported. We may post content which contains links to affiliate sites such as Amazon where we may earn a small commission. This helps us keep the lights on and the articles you enjoy being produced. Thank you for your readership, we appreciate you!

How To's

GMC Acadia oil change: A How-to guide for 2007-2016

by Contributing Author

February 25, 2023

Read More

How To's

Toyota Corolla Oil Change: The Ultimate How-to Guide

by Contributing Author

February 23, 2023

Read More

How To's

Toyota Corolla Oil Change: The Ultimate How-to Guide

February 23, 2023

One of the most important maintenance tasks is doing an oil change in your Toyota Corolla. This guide will walk you through the steps you will need to take in order to get that done. The Toyota Corolla is a reliable and popular car that requires regular maintenance to keep…

Read More

How To's

GMC Acadia oil change: A How-to guide for 2007-2016

February 25, 2023

If you found this article for your GMC Acadia Oil Change useful, make sure to check out our reviews on both sport cars and everyday drivers such as our 2023 Nissan Altima Test Drive! Regular oil changes are essential to keep your vehicle running smoothly and to increase its longevity….

Read More

Do you want more How-To’s like Oil Changes for your Toyota Corolla?

Looking for a way to keep up with the latest in the world of cars? Look no further than our Car Nut Chronicles Newsletter! Whether you’re a car enthusiast or just love everything about cars, our weekly newsletter is the perfect way to get the latest news, insights, reviews, and features straight to your inbox. Our newsletter covers everything from classic cars to sports cars to electric cars, so there’s something for everyone. Plus, as a subscriber, you’ll get access to exclusive content and special offers that you won’t find anywhere else. Join our community of car enthusiasts today and stay up-to-date on the latest trends, events, and developments in the world of cars!

The post Toyota Corolla Oil Change: The Ultimate How-to Guide first appeared on The Car Nut Chronicles.